United States Gypsum Plant
United States Gypsum Company
Rainier, Oregon
Back to Project List
Vibratory Ground Improvement
View of US Gypsum Plant site and vibro compaction rig working adjacent to Lewis and Clark Bridge along the Columbia River.
Project Overview:
US Gypsum Company constructed a manufacturing facility on a property adjacent to the Columbia River, and comprised of reclaimed sand fill and dredged spoil placed over the last 70 years. Ground improvement was necessary to improve the bearing capacity, and to mitigate potential ground settlement and lateral spreading into the river area during a major seismic event in the Pacific Northwest.

The ground treatment area measured approximately 20 acres. Half of the building area required vibro compaction and the other half vibro replacement stone columns. A total of 10,500 vibro compaction/stone column points were installed, consuming 158,000 tons of stone backfill.

    Value of Work Performed:
$4,000,000
Project Duration:
4 months (double shifts)
Project Completion Date:
December 1999
Project Reference:
Owner Representative:
Robert Lukas
(847) 559-0085

LAYNE GEO HOME | LOCATIONS | GEOTECHNICAL SERVICES | SITE MAP | CONTACT US

© 2008 Layne Christensen Company. All rights reserved.